Vous n’êtes pas connecté.
Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
Citation de "Stephan"
Hi,
it's not easy to assemble an aquaduct but it's possible. The warranty is lost in any case because we are not responsible for any errors.
How to do it:
1. Remove all the screws at the top cover. Then you can remove the top aluminum part. Take care about the cable of the vario light and remove it from the aquaero plug.
There are 4 seals at the plexiglas parts and 2 at the fill level indicator. Take care of them.
After that you are able to pull the backplate out of the aluminum profiles. After that you are not able to remove the flowsensor because there is not enough room to do this. You have to remove the tube out of the plug&cool fittings at the bottom plate. Then you can also pull the frontplate high enough to remove the sensor by unclamping the fittings.
Citation de "Top_Nurse"
On the bottom of my Aquaduct their is a plate with a bunch of phillips head screws and I see the name "Nirosta" painted in black letters. Is this the name of the material used and can it be taken off with what solvent?
Citation de "Top_Nurse"
Do you think there would be any problem in putting in a Laing DDC-1 in here as someone here in the states wants to do that. It looks like the space is available, but will the seals take the added pressure (like in the outside flow and fill level tubes).
-