Quoted from "razortime"

Quoted from "Shoggy"

This temperature will not come back and what you describe also has nothing to do with the CPU temperature. You confuse this with the temperature sensors of the voltage controllers which are still there of course. Their temperature will be lower when using PWM because this just forwards 12V directly to the output while the PWM signal tells the pump how fast it should spin. The other way around it would be controlled by the voltage which causes a higher temperature (at least on the auaero 5 series) because unused energy will be "burned"

Ok thanks for confirming.

One last question, I am getting a blank section on the information page so I cannot customise which screens my XT is showing. Any ideas whats happened?


[img]http://i.imgur.com/TFyojYO.jpg?1[/img]

Quoted from "razortime"

Quoted from "razortime"

Quoted from "Shoggy"

This temperature will not come back and what you describe also has nothing to do with the CPU temperature. You confuse this with the temperature sensors of the voltage controllers which are still there of course. Their temperature will be lower when using PWM because this just forwards 12V directly to the output while the PWM signal tells the pump how fast it should spin. The other way around it would be controlled by the voltage which causes a higher temperature (at least on the auaero 5 series) because unused energy will be "burned"

Ok thanks for confirming.

One last question, I am getting a blank section on the information page so I cannot customise which screens my XT is showing. Any ideas whats happened?


[img]http://i.imgur.com/TFyojYO.jpg?1[/img]

Shoggy?


Anyone??????

Quoted from "razortime"

Done a fresh install and even setup as new and still I cannot select which screens I wish to display? The page is just blank????

Quoted from "Namron"

Quoted from "razortime"

Done a fresh install and even setup as new and still I cannot select which screens I wish to display? The page is just blank????

Yup!!... Got excactly the same with me I'm afraid!!.... Lucky I've only updated this one PC of my 3 PC's that run Aquasuite... Have also tried the re-fresh to Factory Defaults & done a complete re-install of Aquasuite ... No imorts of old saved files & not installed using any previous settings e.t.c, A Pretty much total new clean install & still I'm getting the same blank "Slightly Wobbly" Information Pages e.t.c.
Both my other PC's are running Aquasuite fine with the previous update we got, But this newer one seems to have cocked up somewhere along the line :-(.... Anyway ... Hope if others have been getting this problem have notified AC & maybe they'll be able to look into it & see if it's a fix that can be done soonish like.... Fingers crossed & all that :-)...
Nam....


Hi Nam, cheers once again for the amazing guide you wrote, I pointed a friend to it the other day which helped him out and meant I didn't have to hold his hand setting the LT up.

At least I am not going crazy and there is an issue with this information page. I also get the wobbly bits on mine.

Any input from Shoggy on this, it would be nice if this could be looked into?

Quoted from "Shoggy"

Quoted from "razortime"

One last question, I am getting a blank section on the information page so I cannot customise which screens my XT is showing. Any ideas whats happened?

This is an issue with the user rights when the software wants to access the images for this tab. There must be something messed up with your system configuration and/or user profile. Unfortunately I can not provide any help here how to solve this but it is no general problem with the aquasuite.


Thanks for replying Shoggy. I am on a fresh OS install or do you mean user profile for the aquaero. If its the user profile I had to start from scratch as the firmware update made my old profiles redundant.

Quoted from "Namron"

Quoted from "razortime"

Done a fresh install and even setup as new and still I cannot select which screens I wish to display? The page is just blank????

Yup!!... Got excactly the same with me I'm afraid!!.... Lucky I've only updated this one PC of my 3 PC's that run Aquasuite... Have also tried the re-fresh to Factory Defaults & done a complete re-install of Aquasuite ... No imorts of old saved files & not installed using any previous settings e.t.c, A Pretty much total new clean install & still I'm getting the same blank "Slightly Wobbly" Information Pages e.t.c.
Both my other PC's are running Aquasuite fine with the previous update we got, But this newer one seems to have cocked up somewhere along the line :-(.... Anyway ... Hope if others have been getting this problem have notified AC & maybe they'll be able to look into it & see if it's a fix that can be done soonish like.... Fingers crossed & all that :-)...
Nam....

Quoted from "Shoggy"

Reads a bit weird. Could you please take a screenshot how it looks when you open the page, mark where you click and also provide a screenshot how it looks afterwards.