• 13.05.2024, 23:17
  • Register
  • Login

  • You are not logged in.

 

Farbwerk compatibility (aquaero 6 and LED strips)

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

II ARROWS

Junior Member

Posts: 17

Farbwerk compatibility (aquaero 6 and LED strips)

Sunday, September 6th 2020, 6:28pm

Hello,
I need to wire 2×1,5 m LED strips and I were wondering what is the maximum length it can drive for each strip.

I'm also not sure about setup. It does not need to be connected to USB if I have aquabus cable, right?
I imagine I would just need a molex cable and aquabus to aquaero 6 to use it?

Thank you

II ARROWS

Junior Member

Posts: 17

Tuesday, October 13th 2020, 10:21am

Help! please!

InfoSeeker

Senior Member

Posts: 1,764

Tuesday, October 13th 2020, 12:43pm

Quoting from farbwerk USB, aquabus version product page:

"Comaptible LED strips:
LED strips for 12 V, common anode. Suitable LED strips and connectors are available from Aqua Computer.
Maximum current per channel: 2,5 A
Maximum combined current (all channels): 8 A (resulting in a maximum total power of 96 Watts at 12 Volts)"

"aquabus version (53170):
The aquabus version of the farbwerk can be connected to an aquaero 5 or aquaero 6 controller. The aquaero can then be configured to control the outputs of the farbwerk or to transmit sensor data from the aquaero to the farbwerk to be processed by the farbwerk. Up to two farbwerk controllers can be connected to an aquaero 5/6 simultaneously. As a matter of course, this version can also be used as an USB device without aquabus connection."

Similar threads