Bonjour, visiteur, bienvenue sur les forums Aqua Computer Forum. Si c’est votre première visite, nous vous invitons à consulter l’Aide. Elle vous expliquera le fonctionnement de cette page. Pour avoir accès à toutes les fonctionnalités, vous devez vous inscrire. Pour cela, veuillez utiliser le formulaire d’enregistrement, ou bien lisez plus d’informations sur la procédure d’enregistrement. Si vous êtes déjà enregistré, veuillez vous connecter.
Recently bought an Aquaero 6XT and was searching for information about how to assemble it together with my current build.
So far with the parts I have theses:
Aquaero 6XT
Splitty X9 passive
4x Noctua NF-A14 iPPC-2000 IP67 PWM, Heavy Duty Cooling Fan, 4-Pin, 2000 RPM (140mm, Black)
Nemesis GTR 560mm rad
Swiftech MAELSTROM-D5V2-X300 Maelstrom D5V2 300mm Reservoir / Pump Combo
Swiftech IRIS Eco Lighting and Fan Controller - V2
Phobya Temperature Sensor
In / Outer Thread G1/4
AMD threadripper 3970X
Gigabyte Aorus TRX40 Xtreme MB
2x NZXT usb hubs.
Connect the spillty9 to one of the AQ6's fan ports
Connect the fans to the spiltty9
Connect the Phobya Temperature Sensor to one of the AQ6's temp in ports (assuming ambient sensor)
Connect the In / Outer Thread G1/4 to one of the AQ6's temp in ports as coolant sensor
Make a fan controller curve for the fan port with the spiltty9 that is controlled by the ambient/coolant delta.
What about the swiftech maelstrom pump/res and swiftech iris controller? Where would and should I connect those.
Afraid I am not familiar with tHe Swiftech IRIS controller or the pump, but if the pump is PWM controllable, then you can control it from one of the fan ports on the AQ6.