Quoted from "drbo"

Question 1 Should i leave both pumps at 100%, or should I adjust them so that they are running at the same speed?

Question 2 Is there ay way to get the poweradjust part of the aquasuite softwere to read the flow information from the aquaero pert of the software. It seem strange to me that the different parts doest share such info ...

Question 1: No, leave the pumps running as they are.  The second one should be going slightly faster anyways - at least I hope this is what's going on here?  Here's the reason.

The first pump is taking the coolant from 0 L/min in the reservoir and pumping it out say at 5 L/min. This takes, say, 100% power.  When it arrives at the second pump though, the coolant will still be flowing quickly, say at 3 L/min.  So the second pump will not have to work as hard to get the water flowing up to 5 L/min again.  And because of that, you'll be showing an RPM for the second pump to be a little quicker. The speed of the coolant entering is almost 'helping' to spin the propellor faster - lol.

So it's okay to leave it in this configuration.

Question 2:  Hmm, don't know myself about it.  Are you connecting the pump controllers via USB to the computer or directly to the aquaero via the flat ribbon cable?  Or, I guess you'll be using the Laing DDC pump controllers?  So connected via USB, right?  So then there probably isn't communication between the two.  There are a few things that could probably be 'revised' in a next update or something!!  This could be one of them!!

Mike