Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
I already plugged the green wire into the pin 2 and 3 of the relay plug, update the Aquasuite 2012 to the latest version (Beta 9) but I'm unable to find this options I've got an Aquaero 5LT (don't know if this menu you're talking is for Pro or XT version)To get the shutdown fuction to work you have to adjust some alarm settings: Main menu -> Alarm -> Alarm and warning settings -> Alarm/Warning 4 (for example), change its name to Shutdown and as first action to be performed you select switch relay for 2 seconds. Go a few steps back to the main menu of Alarm and go into Temperatures and select temperature alarm 1. Select a sensor as data source and go to limit for alarm. Set your preferred temperature value and also set the alarm level to shutdown (the setting we did before). Afterwards it should work and shutdown your PC when the temperature is to high. I highly recommend to test it so you can make sure it will work when necessary.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Phatboy69« (5. Dezember 2011, 08:27)
And what about the "inverted" pump control? Do you know what may be causing it and how to solve it?You can only set alarms and shutdown functions from the front panel controls for the moment using the menu structure described above. Aquasuite 2012 software will have those features active in a a future release.
Oops just read you have the LT... not sure if you can access the alarms and shutdown features yet since the software isnt available yet and you need the front panel buttons to access the menu.
-