Fan Control Issues

Newbie

Fan Control Issues

Samstag, 12. November 2011, 22:35

Hello,

Now that the aquasuite is reading the data I can't seem to control the fans.

I tried to control from temp sensor input using linear and curved method, but the fans don't adjust in speed. I also tried Power Controlled and RPM Controlled for the fan settings.

The fan section does adjust and change the fan speeds, when I change things manually, but either I'm missing something or something is not working correctly.

I've attached to images:

-fans.jpg - How the fans are configured.
-fancontroller.jpg - How the controller is set.

Any help would be appreciated.

Thanks,
Attila

»atihun« hat folgende Bilder angehängt:

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »atihun« (12. November 2011, 22:37)

Shoggy

Sven - Admin

Beiträge: 18 137

Dienstag, 15. November 2011, 15:31

Should work...

Your temperature range looks a bit uncommon for such a setup. I would set the curve between 25° and 40°C. Maybe your current range is too large so you see no real difference in fan speeds.

Fan Control Issues

Fan Control Issues

Ähnliche Themen