• 27.01.2022, 16:21
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Wednesday, November 16th 2011, 11:29am

Hallo and Welcome.

1 x Hose cutter for a maxi... - OK
1 x Double Protect Ultra 1... - You need more then 1 Liter of Coolant - 3l should be the best choice for a starter
1 x Revoltec cold cathoden... - LED are better then these Cathodes because they don't mess up with the Voltages
1 x cuplex kryos HF for So... - OK
2 x Grafikkarte GeForce GT... - OK and very nice ;)
1 x twinConnect kit for GT... - OK
1 x airplex modularity sys... - OK but a bigger one is always better. Try to get a 480 or a 420 (140mm Fans) especially with the GPUs you want to buy.
1 x aquastream XT USB 12V ... - OK
1 x aquabus / RPM signal c... - Don't need one, because there is one in AS already
1 x Connector set for 1046... - OK
1 x Decoupling set for pum... - OK but you should use the Shoogy Sandwitch
1 x aquastream XT Firmware... - You don't need one - the AS you will get has the newest Firmware and you are able to flash the AS over the aquaero
1 x aquatube G1/4 Copper E... - OK
1 x Illumination module UV... - Your Coolant is not UV reactive, so you don't need the UV Module
1 x aquajet rinsing device... - OK
1 x aquabay AT (installati... - OK
1 x Hose Tygon R3603 12,7/... - OK but to less. Normally you use 1 to 2m in a loop. As a starter you maybe need some tries for the right configuration - get 4m ;)
18 x Coupling 13/10 mm G 1/... - OK - You need a Pair for each Product
1 x Arctic Silver 5 Heat c... - OK
1 x Frontplate for aquabay... - OK
1 x poweradjust 2 USB, ult... - OK , but you will need one of these when you want to control a Laing or a huge amount of fans.
1 x aquaero 5 XT USB fan c... - OK
1 x aquaero powerbooster a... - This is for the old AE4 - doesn't need the service
1 x aquastream connection ... - This is for the Old AS 3.5 - doesn't need one
1 x Connection cable for f... - OK
1 x Flow sensor "high flow... - OK
1 x Temperature sensor 70 ... - In the Box of the AE 5 are 4 of these Sensors included
1 x Frontplate for aquaero... - OK
1 x RGB illumination modul... - OK - You will need one of these
1 x waterblock for aquaero... - OK
1 x multiswitch USB 1.41 V... - OK
1 x tubemeter USB fill lev... - OK
1 x aquabus cable for tube... - OK
1 x poweramp Verstärkerpl... - OK - The Poweramp is only necessary if you want to power more than 4 fans on 1 channel of the AE5
1 x ArctiClean cleansingset - OK
1 x 10-pack Thumbscrews black - OK
4 x Decoupling rubber for ... OK
4 x be quiet! SilentWings ... OK
1 x Heat conductive pad fo... OK


You shuold buy 2 of these to control your coolanttemperature

greetings

This post has been edited 1 times, last edit by "b0nez" (Nov 16th 2011, 12:23pm)

:rolleyes:

Wednesday, November 16th 2011, 9:07pm

Thank you b0nez

I will follow your advice.

Just 4 questions:

1. Does the airplex 480 or the 420 fit in the Obsidian 800D? I believe they might fit if I mod the case, but without modding it they wont' fit, right?

2. I'll be controlling the fans on the watercooling setup and 3 more 140mm fans on the case so there is no need for both the poweradjust and the poweramp, right?

3. I'm buying the aquabay for the aquatube because I don't know if there's another method of assembling the aquatube on the case. I don't know if this the best aesthetic option or if there's a better way to go.

4. Do you think this setup is enough to cool the 2 GPUs, the RAM and a i7 3930K CPU?

Updated list:


Shopping Cart

1 x Hose cutter for a maxi...

3 x Double Protect Ultra 1...

1 x cuplex kryos HF for So...

2 x Grafikkarte GeForce GT...

1 x twinConnect kit for GT...

1 x airplex modularity sys...

1 x aquastream XT USB 12V ...

1 x Connector set for 1046...

1 x aquatube G1/4 Copper E...

1 x aquajet rinsing device...

1 x aquabay AT (installati...

4 x Hose Tygon R3603 12,7/...

18 x Coupling 13/10 mm G 1/...

1 x Arctic Silver 5 Heat c...

1 x Frontplate for aquabay...

1 x aquaero 5 XT USB fan c...

1 x Connection cable for f...

1 x Flow sensor "high flow...

1 x Frontplate for aquaero...

1 x RGB illumination modul...

1 x waterblock for aquaero...

1 x multiswitch USB 1.41 V...

1 x tubemeter USB fill lev...

1 x aquabus cable for tube...

1 x ArctiClean cleansingset

1 x 10-pack Thumbscrews black

4 x Decoupling rubber for ...

4 x be quiet! SilentWings ...

1 x Heat conductive pad fo...

1 x Revoltec Laser LED, Blue

1 x Shoggy Sandwich constr...

1 x Illumination-insert G1...

2 x Temperature sensor int...

Similar threads