• 26.04.2024, 15:37
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Need advice - connecting mps flow 200 and D5 pump to aquacomputer 5 pro

_KaszpiR_

Junior Member

Beiträge: 33

Need advice - connecting mps flow 200 and D5 pump to aquacomputer 5 pro

Mittwoch, 23. Januar 2013, 22:29

I'd like to connect mps flow 200 and (future) D5 USB pump to the aquaero 5 pro:
mps flow 200 - http://shop.aquacomputer.de/product_info…roducts_id=2899
D5 pump with USB and aquabus interface http://shop.aquacomputer.de/product_info…roducts_id=2901

I want to use 4 pin cables for that - http://shop.aquacomputer.de/product_info…roducts_id=2846 - so that pump and mps will be connected to the aquaero device directly, to avoid later connections with USB cables.

If I'm not mistaken:
the mps flow 200 is 'low speed' so it should be connected to aquabus 1
the D5 pump is 'high speed' so it should be connected to aquabus 2.

Looking forward for the feedback.
My setup - Project Replicant

_KaszpiR_

Junior Member

Beiträge: 33

Donnerstag, 24. Januar 2013, 20:15

Ah, that means I need 4-pin Y splitter and 2x 4pin aquabus cables. and it should be connected to aquabus 2 via Y splitter.
My setup - Project Replicant

Ähnliche Themen