Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Have a look HERE and give it a read. Things should work OK if things are connected & set up correct... Make sure you choose which control method your going to use, Either USB or Aquabus (or both if your that way inclined ) you select which method from the D5 Pump Menu (when connected via the USB) under the "SYSTEM" Tab from the D5 Menu & select either Aquabus or USB Priority...
N.
I have no idea what your saying to be honest.... But here goes anyway..... The Pump needs to be connected to the 12v Molex all the time..... If you only use the USB to connect the pump to the mother board that is hardly going to power a 12v pump as the USB only carries 5v......Pls help.... i have connected USB cable from D5 Pump to my PC but it not working ? the aquasuite can't detect D5 pump !!!
Or my D5 pump controller already gone ???
**** I can see something connect 4 pin molex to power supply pump can run..... and if connect 4 pin and USB cable together ....it's look like can power up the speed of D5.
can someone give me advise ???
sorry for my english not good......I have no idea what your saying to be honest.... But here goes anyway..... The Pump needs to be connected to the 12v Molex all the time..... If you only use the USB to connect the pump to the mother board that is hardly going to power a 12v pump as the USB only carries 5v......Pls help.... i have connected USB cable from D5 Pump to my PC but it not working ? the aquasuite can't detect D5 pump !!!
Or my D5 pump controller already gone ???
**** I can see something connect 4 pin molex to power supply pump can run..... and if connect 4 pin and USB cable together ....it's look like can power up the speed of D5.
can someone give me advise ???
Once the pump is connected up to the PSU with the Molex,,,,
If you then use the USB to the Motherboard.... You should have a PUMP MAIN MENU TAB show up underneath the Aquaero 5 Menu Tab in the Aquasuite. It's then from the pumps own menu you would control the pump..
If you use the Aquabus to connect the pump to the Aquaero 5 then the pump will show up in the Aquaero 5 Main Menu Tab only...
It really is not so hard... ........... Unless your pump is broken??...
N.
1) The speed of the pump shouldn't speed up because of the extra voltage from the USB..... If the pump is connected to the PSU via it's Molex it should only receive 12v....sorry for my english not good......I have no idea what your saying to be honest.... But here goes anyway..... The Pump needs to be connected to the 12v Molex all the time..... If you only use the USB to connect the pump to the mother board that is hardly going to power a 12v pump as the USB only carries 5v......Pls help.... i have connected USB cable from D5 Pump to my PC but it not working ? the aquasuite can't detect D5 pump !!!
Or my D5 pump controller already gone ???
**** I can see something connect 4 pin molex to power supply pump can run..... and if connect 4 pin and USB cable together ....it's look like can power up the speed of D5.
can someone give me advise ???
Once the pump is connected up to the PSU with the Molex,,,,
If you then use the USB to the Motherboard.... You should have a PUMP MAIN MENU TAB show up underneath the Aquaero 5 Menu Tab in the Aquasuite. It's then from the pumps own menu you would control the pump..
If you use the Aquabus to connect the pump to the Aquaero 5 then the pump will show up in the Aquaero 5 Main Menu Tab only...
It really is not so hard... ........... Unless your pump is broken??...
N.
i always connect Molex to the PSU ! but i talking about
1) when i connect USB cable from PUMP to Motherboard.... i saw that the speed quite faster than connect only Molex. (look like 12V (PSU) + 5V (USB) than can power up speed !
2) when i open the aquasuite... I can't see pump on main menu TAB !!
3) i also have aquro 5 XT and connect to Motherboard it can be show in main menu of aquasuite software.
Note : I have swap the usb cable from aquro to pump, but still same the aquro can see on aquasuite !! for pump not see anything...
With this wiring you killed the electronic inside of the pump. The aquabus is working with 5V and 3.3V. The fan header has 12V.pump by aquro via aquabus port or Fan4 (PWM port) it not working !
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »sratthaya« (9. September 2013, 10:38)
With this wiring you killed the electronic inside of the pump. The aquabus is working with 5V and 3.3V. The fan header has 12V.pump by aquro via aquabus port or Fan4 (PWM port) it not working !
Meaning USB pump broken now ? if it's broken can i buy the sparepart from your company ?
if it's possible, i will add this sparepart into my order as well.
Send an email to the support.
info@aqua-computer.de
-