yes I know that by default Aquasuite only allows temperature sensors from hwinfo to be added as software sensor which are only allowed to control the fans
but as I said the temperatures depend heavily on ambient temperature in my room which changes a lot during the day (day vs night) depending on the outside temperature therefore I really cannot use that....the temperatures vary so much that it becomes impossible to judge if my system is under load or not just from the temperature
the idle temps during hot days are higher then load temps during night
I don't really understand why the limitation when aquasuite has access to all those performance indicators which would be a lot better for determining the idle/load of the system
I already found out the sourcePath for the gpu clock, gpu voltage etc (when you export the item from overview the sourcePath is saved in the file)
but even when I edit the service_settings.xml and changing everything according to data in HWiNFOSharedMemoryViewer.exe and changing the unit values to what are the defaults in aquasuite.xml it doesn't work (aquasuite will show that it's using the correct shared item data but the data are not coming in)
|
Quellcode
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
|
<SoftwareSensorConfig>
<enabled>true</enabled>
<sensorName>GPU Clock</sensorName>
<id>7</id>
<src>hwinfo</src>
<sourcePath>gpu_1_nvidia_geforce_gtx_970_/gpu_clock/100663296_0_0_0</sourcePath>
<unit_override>false</unit_override>
<unit_from>
<t>Frequency</t>
<t_value>Hertz</t_value>
<accuracy>1</accuracy>
<time>None</time>
<range>Mega</range>
<range_mode>Manual</range_mode>
</unit_from>
<unit_to>
<t>Frequency</t>
<t_value>Hertz</t_value>
<accuracy>1</accuracy>
<time>None</time>
<range>Mega</range>
<range_mode>Manual</range_mode>
</unit_to>
<unit_offset>0</unit_offset>
<unit_scale>1</unit_scale>
</SoftwareSensorConfig>
|
|
Quellcode
|
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
|
<SoftwareSensorConfig>
<enabled>true</enabled>
<sensorName>GPU Core Voltage</sensorName>
<id>7</id>
<src>hwinfo</src>
<sourcePath>gpu_1_nvidia_geforce_gtx_970_/gpu_core_voltage/33554432_0_0_0</sourcePath>
<unit_override>false</unit_override>
<unit_from>
<t>Voltage</t>
<t_value>Volt</t_value>
<accuracy>1</accuracy>
<time>None</time>
<range>None</range>
<range_mode>Manual</range_mode>
</unit_from>
<unit_to>
<t>Voltage</t>
<t_value>Volt</t_value>
<accuracy>1</accuracy>
<time>None</time>
<range>None</range>
<range_mode>Manual</range_mode>
</unit_to>
<unit_offset>0</unit_offset>
<unit_scale>1</unit_scale>
</SoftwareSensorConfig>
|
with the clock there might be a problem with Fallback temperature which only allows range of -40 to +120, but I also tried gpu voltage which is 0.8-1.2 and it didn't work either
with the voltage there might be a problem with the accuracy set to 1 but even with 1 (if that means number of decimals) it should still be showing 0.8 and not 0.0 if it worked otherwise
I know I am trying to force Aquasuite to work in a non-intended way but only because the available options of controlling the fans won't work for my system/environment