Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
I need to do this but is not clear. If I want to put 4 fans on one A6 PWM header with a splitter do I get 1 4-pin PWM fan and 3 3-pin fans? Will that mane sure that only one RPM signal is reported back? I understand the concept
and am not sure if it is a change in fans (yeah, a bit cheaper) or a mod to the 3 connectors on the "y" cable.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »barfly« (4. Februar 2016, 02:57)
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Jakusonfire« (4. Februar 2016, 03:07)
thx for reiterating my post virtually word for word3 pin fans still have an rpm wire and won't work properly on a pwm header
When they say only a single rpm signal they are talking about the wiring of the splitter cable. Four wires come out of the Aquaero but only a single fan will be connected to all of them. The other fans just skip the rpm wire connection but have the other 3.
Some splitter cables or boards come wired that way and some don't.
thx for reiterating my post virtually word for word3 pin fans still have an rpm wire and won't work properly on a pwm header
When they say only a single rpm signal they are talking about the wiring of the splitter cable. Four wires come out of the Aquaero but only a single fan will be connected to all of them. The other fans just skip the rpm wire connection but have the other 3.
Some splitter cables or boards come wired that way and some don't.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Jakusonfire« (4. Februar 2016, 08:48)
thx for reiterating my post virtually word for word3 pin fans still have an rpm wire and won't work properly on a pwm header
When they say only a single rpm signal they are talking about the wiring of the splitter cable. Four wires come out of the Aquaero but only a single fan will be connected to all of them. The other fans just skip the rpm wire connection but have the other 3.
Some splitter cables or boards come wired that way and some don't.
Alright Jakuson, no need to call out folks. The OP obviously didn't understand the difference between voltage and PWM until I explained it. I could have added the points you made about the importance of the signal wire but there's no need to come off as an ass.
actually no they dont all have rpm wires as having more than one will confuse the fan header and cause erratic readings,there can only be one fan -rpm- signal,im sure this is what was meant.They all still have RPM wires of course
Dieser Beitrag wurde bereits 6 mal editiert, zuletzt von »Jakusonfire« (8. Februar 2016, 22:12)
it was actually a light hearted barb about posting the same info when they were clearly being written at the same time. Something that happens all the time in forums.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Railgun« (7. Februar 2016, 12:46)
it was actually a light hearted barb about posting the same info when they were clearly being written at the same time. Something that happens all the time in forums.
Man...you must type slow given the 10m time difference between posts.
This is all being made to be more difficult than it needs to be.
You need this.
http://www.performance-pcs.com/ek-cable-…n-pwm-10cm.html
Granted it's only for three fans...I can't find a cable that supports four. You'd need to double up on/daisy chain the cables.
Alternatively, get one of these...
http://www.amazon.co.uk/Phobya-8x-4-Pin-…M/dp/B00OD7MO6E
And you have room to grow.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Jakusonfire« (8. Februar 2016, 22:10)
-