Hi everyone, I'll get straight to the point. I own a Farbwerk rev. 2 with bluetooth, usb and aquabus interface. I've tried to connect it through both USB and Aquabus, and the device is recongnized and everything seems fine.
The only problem is that after I added more than 2 separate LED strips out of 4, the 3rd won't be recongnized. As I have 3 meters of IP65 LEDs, and 4 led cables for the 4 channels I've tried every possible combination of cables and leds strips.
NO WAY, NO WAY. I've tried to use different molex rails, different cables, outputs, channels, software resets.. I swapped every possible setting twice, both with cabling and power source: no matter what, that bastard will only light up 2 strips maximum at a time.
The only really strange thing I noticed, if can help, is that tried to swap the 4 pin channels that go into the farbwerk, I sometimes get only the blue channel.
So resuming, only 2 channels out of 4 (no matter what leds or cables) seem to work, sometimes the additional only show the Blue channel. I refuse to believe this a faulty or broken unit.... It just behaves in very strange way, believe me I've cheked those connections 10 times before writing this post.
Hope someone can help, this thing is really really anoying