Sie sind nicht angemeldet.
this is NOT possible.Card 2 or 4 times, and wire it to the lanes 1-4, 5-8, 9-12, 13-16.
You can´t wire 2 or more different devices to one PCIe slot.
Every PCIe slot has the capability to handle the handshakes from excatly one device.
you could use a pcie switch like one of these http://www.avagotech.com/products/pcie-s…/pcie-switches/this is complete different. This pcb has NO PCIe NMVE slots. The flash is directly soldered with the board.Seagate 8TB Nytro XP7200 NVMe SSD
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Hufeisen« (17. August 2016, 18:47)
and than we have a product that is more expensive without any benefit for 99% of our customers.you could use a pcie switch like one of these http://www.avagotech.com/products/pcie-s…/pcie-switches/
or a pcie nvme raid controller like http://highpoint-tech.com/USA_new/series…0a-overview.htm
Only because we allready discussed about it.
I ordered me a PCI Express 3.0 16x Card that can take 4 M.2 up to 22110 SSD connected each through PCI Express 3.0 4x to the Computer.
So yah, someone made such a Card. It is possible.
It would have been better if Aquacomputer had one with either passive or active watercooling.
However, i dont think they will bother designing one, sice you Need a PCI Express Switch, and the whole Card costs 450 USD.
Here it is, the Card !
you need RAID so you can swing your dick a bit moreThe Card doesnt have Raid, bu t the Point of the Card is not to offer Raid, but to offer the possibility of connecting more than one SSD to a PCI Slot, if there are more lanes available.
For instance my Aquacomputer Card sits in a 16x 3.0 Slot, so 12 Lanes are wasted. With this Card i can add 3 more SSD.
What do you Need raid for, when one SSD has 3500 mb/s read speads and 2500 mb/s write Speeds ?
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »baconinabun« (4. März 2017, 00:36)
-