All USB connections will work together, though you may need a
USB hub to service them all.
Your list has 6 MPS devices:with aquabus capability
- two D5 pumps with USB
- two High Flow sensors with USB
- two level sensors in the D5 pump/aqualis adapters
The aquabus only has four MPS addresses, so not all six MPS devices in your list could be on the aquabus simultaneously.
BUT, typically, pumps are set and forget items, so you can adjust them manually via their USB connections, leaving the 2 flow and 2 level sensors to be integrated with the aquaero over the aquabus for monitor/control capability.
The farbwerk has two addresses available on the aquabus so it can be integrated with both connection types.
The aquaero has eight temperature input ports, so the seven you have listed will all connect without issue.