Aquabus D5 and 6XT regulation

Newbie

Aquabus D5 and 6XT regulation

Freitag, 28. Juli 2017, 00:16

Hi,

I would like to advise how to regulate this pump. I plugged it into the highflow connector in the aqua6xt if I click to pump in aquasuite - nothing to change and the pump goes still at 3000rpm. Any info what am I doing wrong? I dont have pluged USB cable.

Thanks. :huh:

EDIT: Here is image: http://i.imgur.com/mPkZsWv.png if i slide slider anyhow still the same speed.

Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von »racecar« (28. Juli 2017, 00:33)

Jakusonfire

Full Member

Beiträge: 306

Montag, 31. Juli 2017, 04:53

Becuase as the image shows you have the minimum speed set to 68% and the maximum to 100%

Setting the preset slider to 6% makes the pump run at 6% of the range from 68 to 100 which is 71. If you set min to 50% and max to 80 with the preset to 50% the pump will run at 50% of the range between 50 and 80 which would be 65%

If you set the min to 0 and max to 100 you will get the full range of control

racecar

Newbie

Beiträge: 3

Montag, 31. Juli 2017, 14:56

Of course, I understand, but rpm does not change when i slide with the sliders anyway.

http://i.imgur.com/1XVz3c1.png

sebastian

Administrator