• 25.04.2024, 06:16
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

After Update Firmware All aquabus of Aquaero 6 Pro no works

sfcxxhim

unregistriert

After Update Firmware All aquabus of Aquaero 6 Pro no works

Mittwoch, 20. Dezember 2017, 19:07

[img]https://scontent.fhkg1-1.fna.fbcdn.net/v/t31.0-8/25542502_10156035944665956_239270550906895915_o.jpg?oh=b6beac543e14adb9355297f67ace4066&oe=5AD14ADF[/img]



Have One D5 Pump and One Flow Sensor Connected to the "aquabus High" Port
After Update Firmware All aquabus no works
i Connected to the "aquabus Low and High" Port one by one also not working....

Please Help Thanks~~

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »sfcxxhim« (20. Dezember 2017, 19:12)

InfoSeeker

Senior Member

Beiträge: 1 762

Donnerstag, 21. Dezember 2017, 05:40

If memory serves, after the firmware update you need to shut down the computer, turn off the power supply, and unplug the power supply power lead for a minute or so.
Then reconnect the power supply power lead, turn on the power supply, and restart the computer.

Hopefully that works for you.

Dundys

Full Member

Beiträge: 410

Donnerstag, 21. Dezember 2017, 05:48

Also, did you update your hardware's firmware

Ähnliche Themen