Sie sind nicht angemeldet.
Hi,
I am running an EK dual DDC SBay pump/res combo plugged into an Aquaero 6 XT.
I have both DDC pumps on a y splitter to the Fan4 header on the AQ6.
Is that the right way to do it?, or should I be putting the 2 wires on each DDC to another connection?
Thanks!
The DDC pumps get power from the PSU.
I get RPM metrics from the AQ6, and use the "speed controlled" option on the fan type.
1. I'm not sure if PWM is more appropriate vs speed controlled.
2. Should the DDC's be hooked up to flow (or rpm, going from memory here), rather than Fan4?
Thank you for the reply. I'm brand new to both liquid cooling and AQ6.
So they are PWM DDC pumps which get a power from the PSU.
I get confused about the connector as it only has 2 wires, but I suppose those are the "PWM" part, so PWM should be the fan type in Aquasuite.
I do connect them both via Y splitter to Fan4, I suppose this is good as the pumps seem to have variable flow (That I've noticed).
Thanks again!
-