Ah, OK.
So I believe you're saying that by removing the Vardar Fan from the splitter it will engage the two Noctua fans. The problem is two types of fans on one splitter, so it can only run one type.
At which point I'll just need to route the single Vardar directly to the Aquaero.
However, I currently don't have a spare port on the Aquaero to do so...
In my 4th fan header slot I have a number of 3mm single reservoir LEDs linked up to a 3 pin adapter. The LEDs have standard 2 pin connections. I have a Farbwerk which I use for RGB LED strips with a few vacant slots. So my question: Is there an adapter to route 2 pin single LEDs to the headers on the Farbwerk?
Just use Connector “PWM 1/2” on the AQ. After all that's what it was designed for.
^ It's a custom built cable but it should give you an idea what I'm talking about.
You could also just wire those 3mm LED's directly to the PSU. There dozen of options you can create to power those 3mm LED's.