New Aquasuite e Aquabus problem.

Junior Member

New Aquasuite e Aquabus problem.

Mittwoch, 20. Juni 2018, 15:58

Hi, today I install the latest version of aquasuite.

I have 3 aquabus peripherals: 2 Aquacomputer D5 and 1 Farbwerk.

Update their firmware via usb.

Now the problem. Only one device at a time is recognized and always on ID 21.

Set a different ID for each device but this does not seem to work.

I am going crazy

https://uploads.tapatalk-cdn.com/2018062…442f2241f1c.jpg

https://uploads.tapatalk-cdn.com/2018062…394652a2e17.jpg

Shoggy

Sven - Admin

Beiträge: 18 130

Mittwoch, 20. Juni 2018, 18:03

Have you already performed a cold start of the aquaero? The aquaero only searches for aquabus devices after a cold start. If you just shut down your system it will still get power via USB and remains in standby mode. You have to cut its power completely to make sure that it will look for new devices after the next start.

Legolas84

Junior Member

Beiträge: 14

Mittwoch, 20. Juni 2018, 19:02

This fix my problem.
Thanks

maybe it would be useful a button to manually refresh devices connected to the aquabus port, in aquasuite software.....

Shoggy

Sven - Admin

Beiträge: 18 130

Donnerstag, 21. Juni 2018, 14:16

The aquasuite 2018 will have a function where you can initialize the aquabus again without restarting the PC or aquaero.

New Aquasuite e Aquabus problem.

New Aquasuite e Aquabus problem.

Ähnliche Themen