I am planning a new build and want to use the Aquaero 6. The principle of the build is to have a water cooled system that can be expanded to have an external cooler that can be attached at a later date. I am planning either a further large radiator or a chiller or both. The aim is to achieve the lowest noise possible whilst achieving as close to ambient temperatures as possible. With the chiller I may try to go below ambient but am aware of condensation issues.
I have planned out the components for the aquaero 5 but would like some advice on the wiring. I have come up with a schematic which I would be grateful if the more knowledgable users could advise on. My issue is that I would need 2 y splitters for the aqua link wire to connect to the 2 pumps. Is this ok to do as I could not find a way to connect to the second pump if I did not use the second Y splitter.
I plan on using Corsair LL120 on the front 4 mounted on the fan. The 9 fans will be standard fans with no RGB mounted on an external radiator.