Hi, I realized that the "user defined" option under flow sensors can not be increased beyond 1000 pulse/litre. Is this a limitation or can it be increased with a firmware or software update?
I connected a Aquatuning GMR Flow Sensor (a transparent type - I wanted to see something spinning when there is flow and Aquacomputer has nothing like this) to both a Aquaero 6 XT and a Poweradjust 3. It works fine except the impulse/liter can not be increased to over 1000. The datasheet for this meter specify 2100 pulse = 1 liter so my reading is off.
I also have a Aquacomputer Flow sensor mps flow 400 in the same loop both readings are different.