Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Zitat
Terminals with connections parallel to the card will also be available here later. These are aimed at customers with vertically installed graphics cards.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »InfoSeeker« (30. Dezember 2018, 19:01)
InfoSeeker that is where I shop too. I have ordered stuff direct from Aquacomputer also. I must have missed it.Anyone get their hands on one yet? I am waiting for them to come in stock?
Performance PCs in Palm Beach, Florida got a shipment last Thursday or Friday.
I am not sure how many, but I saw a low stock alert of 5 on Saturday.
They were out of stock on Sunday.
InfoSeeker that is where I shop too. I have ordered stuff direct from Aquacomputer also. I must have missed it.
I would like to go with either 5L green or 5L orange Double protect coolant but have not seen it on PPCS site. I may have to get it directly from AC if it is ship able.
Thanks;
Crazy-Carl
What are the dimensions please? Need to know if it will fit within a case I am looking at (Cerberus X by Sliger). It will be close I know...........thanks in advance.
What are the dimensions please? Need to know if it will fit within a case I am looking at (Cerberus X by Sliger). It will be close I know...........thanks in advance.
I do not have one of these, but looking at the pictures it appears to be constrained to the size of the graphics card for the most part, with the exception of the connection block.
I have a connection block from a previous model that is probably very similar, but it is for an active back plate, so it would be a bit wider.
I believe you interest may lie in the height, so I will give you that.
The connection block rises 25 mm above the water block, which should be about the same above the graphics card.
Thank you - yes - that was what I was looking for. The case has a constraint of 152mm in graphics card height, the combination of the card + water block + connection block would be too high.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »InfoSeeker« (7. April 2019, 23:01)
Thank you - yes - that was what I was looking for. The case has a constraint of 152mm in graphics card height, the combination of the card + water block + connection block would be too high.
Are you sure it wouldn't work?
This is a Zotac RTX 2080 Ti AMP (I believe founder edition equivalent) under a water block and it measures 110 mm from the bottom of the card to the top of the block. Adding the 25 mm for a connector block should still allow around 15+ mm for connector maneuvering, which would come from the side, not the top like this block..
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Barney Gumble« (8. April 2019, 01:41)
it shows the difference in the FE and Gigabytes gaming OC cards
I take reference design to mean Founder's Edition.Zitat
Full cover water block for NVIDIA RTX 2080 Ti and Titan RTX graphics cards according to reference design
Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von »ThiBor« (28. April 2019, 14:11)
-