Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Update!Try to increase the software senor timeout or adjust the fallback temperature.
The old behavior is an issue.
Dieser Beitrag wurde bereits 9 mal editiert, zuletzt von »Dundys« (9. März 2021, 01:08)
Zitat
Q: I want to create a commercial application that would read sensor data from HWiNFO via SHM. Will I be allowed to utilize the SHM?
Zitat
A: Yes, according to new conditions you're allowed to do so. HWiNFO32/64 version 7.0 or later shall be used on the client side.
Zitat
- To compensate for the SHM limitation, the interface details will be made fully public, so that anyone can interface with HWiNFO to read all sensor data. See below FAQ for more details.
You have to enable "Shared Memory Support" in HWInfo 7.0. Since 7.0 this option is disabled by default. Without this function, Aquacomputer Service cannot read data from HWInfo.No it does not work with HwInfo64 v7.00.
I have the same issue.
It did work with the previous version.
The data source HwInfo does not appear at all in aquasuite. Even after the service is restarted.
I really need to monitor the T° of the Memory Junction in the NVidia card.
Dieser Beitrag wurde bereits 6 mal editiert, zuletzt von »LukS« (14. März 2021, 11:20)
any plans to add the other sensors frm the rx 6000 series to aquasuite? such as hotspot, vr socc etc, there is at least 5 missing temps. also what is the polling rate of the cpu temp checks, it seems very slow to me, for example i am used to hwinfo 500ms; is there anyway to change or define this? i cant see it anywhere unless ive missed it.The aquasuite works with hwinfo 7
Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »deckardcain« (6. April 2021, 12:58)
https://www.hwinfo.com/forum/threads/mem…6937/post-30453They have fixed the bug already, can you enable the sensor back?
A basic manual for setup the devices is in each detailed device manual in the download section:
https://aquacomputer.de/handbuecher.html
-