If the only 2 bits you have are the
D5 NEXT and the
SPLITTY9, and you will use the SPLITTY9 to control fans, then:
- connect the D5 NEXT 'USB' port to an internal motherboard USB port
- set the SPLITTY9 jumper to NOT aquabus (only the port marked RPM will report fan RPM back)
- connect the D5 NEXT 'fan' port to the SPLITTY9 'input' port
- connect your fans to the 9 ports on the SPLITTY9. If you have less than 9 fans, ensure one is on the port marked 'RPM'