• 19.04.2024, 02:15
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

AE6 and Corsair pump question

knacker

Full Member

Beiträge: 120

AE6 and Corsair pump question

Dienstag, 13. August 2019, 22:51

Can anyone let me know if I plug the 4 pin cable from a Corsiar RGB pump into a fan header, will it allow me to control the pump speed like a fan effectively? Power is coming from molex also but was just wondering if it could work as well
Thx ;( :D

Hufeisen

Senior Member

Beiträge: 566

Dienstag, 13. August 2019, 22:59

Corsair has a lot of pumps... which Model is it exactly?

knacker

Full Member

Beiträge: 120

Dienstag, 13. August 2019, 23:37

It's the new XD5 rgb thingy- says it has a D5 pwn pump 8|

Hufeisen

Senior Member

Beiträge: 566

Mittwoch, 14. August 2019, 20:27

You can connect the Corsair D5 Pump to the Aquaero 6, but it is possible that you cant control the Pump with the PWM Signal.
The reason is that the D5 pump PWM Signal does not comply with the Aquaero PWM Specifications.

If you cant control the pump, you need to modify the Connector and add some resistors.
Read this post how to do it: https://www.overclock.net/forum/61-water…ml#post22946282

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Hufeisen« (14. August 2019, 20:44)

GTXJackBauer

Full Member

Beiträge: 401

Donnerstag, 15. August 2019, 00:39

Zitat von »Hufeisen«

You can connect the Corsair D5 Pump to the Aquaero 6, but it is possible that you cant control the Pump with the PWM Signal.
The reason is that the D5 pump PWM Signal does not comply with the Aquaero PWM Specifications.

If you cant control the pump, you need to modify the Connector and add some resistors.
Read this post how to do it: https://www.overclock.net/forum/61-water…ml#post22946282


+1

Ähnliche Themen