QUADRO 360 Firmware 1018:
ATTENTION: All current device settings and profiles become invalid with this update!
New: Number of controllable RGBpx LEDs increased from 64 to 90
New: Number of LED controllers increased from 4 to 8
New: Number of Software sensors increased from 8 to 16
New: Adjustable fall-back power for fan output (e.g. for missing sensor data at system startup)
My QUADRO does not appear to implement this function properly.
At system start the case fans still ramp up beyond the 'Fall Back' value assigned until the Computer Service launches, when they ramp down to the minimum hold value set.
My 'Fall Back' and 'Minimum Hold' values are both set to 20%, so I would expect no RPM decrease after the Computer Service launches... at worst case, an RPM increase if the Case/Ambient temp were sufficiently high.
fall_back_setting.jpg