Sie sind nicht angemeldet.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Lucky75« (12. August 2020, 14:10)
Your Fans need 0.3A each, so you can only connect 8 Fans to a Splitty9... Overcurrent protection will prevent damage on the Aquaero, but the Fans will stop spinning...Zitat
aquaero 6:Maximum current is 2.5 A per output independent of output voltage. Outputs will be switched off if amplifier temperatures reach a critical level and will automatically be reactivated when cooled down.
If an output current of 3 A is exceeded, the output will be permanently disabled. To reactivate the output, the aquaero (or the complete PC) has to be disconnected from power for a short period of time.
Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von »Hufeisen« (13. August 2020, 19:43)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Lucky75« (14. August 2020, 10:00)
Only Noctua and EKWB Fans have problems with Aquaero+Spllitty9.I believe the make and model fan is not compliant to the Intel PWM Spec
The Aquaero should be fine, but the load on the Aquaero is high. It may be necessary to cool the Aquaero.That is is 2.4A on each FAN port ... if Aquero is ok with that configuration all is fine by me.
Dieser Beitrag wurde bereits 6 mal editiert, zuletzt von »Hufeisen« (14. August 2020, 17:37)
-