• 22.10.2020, 22:42
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Issue with OCTO after updating to latest firmware and aquasuite X.25

Friday, August 21st 2020, 6:47pm

I recently updated to the latest firmware for my OCTO and to the X.25 aquasuite software (my license ran out so I can't update to X.26). Anyways after rebooting all my fans are stuck at 100% and my RGB has reverted back to rainbow, which I also cannot change. Aquasuite detects my OCTO and Vision, and shows all my fan speeds, plus the temperature sensor I have installed in my loop.
Is there a way to reflash the firmware of the OCTO, or does anyone else have any ideas? Thanks.

Sunday, August 23rd 2020, 4:38am

Anyone?

Sunday, August 23rd 2020, 7:58am

Have you disconnected the Octo, or the whole computer from the power for a few minutes?
This should help in most cases.
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

Tuesday, August 25th 2020, 4:17am

Have you disconnected the Octo, or the whole computer from the power for a few minutes?
This should help in most cases.
Thanks for the reply. I turned everything off and left the power off actually switched off the PSU for a day with no change. I completed uninstalled the software and removed all the settings, same thing happens after a reinstall.
Whenever I change any settings on a fan nothing seems to update. If I then exit and re-enter the software all settings have reverted back to everything sitting at 100%.

This post has been edited 1 times, last edit by "fatpizza" (Aug 25th 2020, 4:20am)

RE: Issue with OCTO after updating to latest firmware and aquasuite X.25

Thursday, August 27th 2020, 5:02pm

I recently updated to the latest firmware for my OCTO and to the X.25 aquasuite software (my license ran out so I can't update to X.26). Anyways after rebooting all my fans are stuck at 100% and my RGB has reverted back to rainbow, which I also cannot change. Aquasuite detects my OCTO and Vision, and shows all my fan speeds, plus the temperature sensor I have installed in my loop.
Is there a way to reflash the firmware of the OCTO, or does anyone else have any ideas? Thanks.
I am having the exact same issue after moving to X.26, 2xRGB LED's stuck on rainbow. OCTO crashes when trying to modify.

Shoggy

Sven - Admin

Friday, August 28th 2020, 9:00am

Please install the latest Microsoft Visual C++ Redistributable for Visual Studio:

https://support.microsoft.com/en-us/help…ual-c-downloads