Aquasuite settings explanation

Junior Member

Aquasuite settings explanation

Montag, 21. September 2020, 07:16

Hi

I don't understand this setting,if someone can explain it to me please

Thanks

https://www.casimages.com/i/200921071852356425.png.html

Ralph_IT

Junior Member

Beiträge: 18

Montag, 21. September 2020, 07:54

It means that you will see the slider in the controller ranging from 0 to 100% but the values will scale to the minimum and maximum you set there.
Ex: You set the minimum to 50% and the maximum to 90% of a controller that controls a fan. In the controller , 0% will set the fan to operate at 50% of its speed, and 100% to 90% speed of the fan.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Ralph_IT« (21. September 2020, 07:56)

Asryan

Junior Member

Beiträge: 40

Montag, 21. September 2020, 08:31

Zitat von »Ralph_IT«

It means that you will see the slider in the controller ranging from 0 to 100% but the values will scale to the minimum and maximum you set there.
Ex: You set the minimum to 50% and the maximum to 90% of a controller that controls a fan. In the controller , 0% will set the fan to operate at 50% of its speed, and 100% to 90% speed of the fan.

That's what I thought but when I tried it had for instance a curve going from 45 to 100 but when i put like 40, the speed goes to 66%, why?

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Asryan« (21. September 2020, 08:33)

Ralph_IT

Junior Member

Beiträge: 18

Montag, 21. September 2020, 09:17

Well, it seems to me that it is doing it fine.
Calculation is: 45 (Base control set) + Aquasuite control number*((100-45)/100)
(If calculation is not right, please, someone correct me)

CONTROL-->AQUASUITE
45--0
50,5--10
56--20
61,5--30
67--40
72,5--50
78--60
83,5--70
89--80
94,5--90
100--100

Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »Ralph_IT« (21. September 2020, 09:23)

InfoSeeker

Senior Member