VISION Glow table top issue

Newbie

VISION Glow table top issue

Dienstag, 6. Oktober 2020, 14:27

Hello,

I received a "VISION Glow table top unit" this morning and so I connected it.
So the device turned on with the light and the information on the screen.
I then wanted to set the options in aquasuite, this one asked me to update the firmware because it was incompatible with the current version.
At 48% aquasuite displays a message telling me that the update had encountered an error and that I had to stop my power supply for 20 seconds and restart the update, I did what it asked me but I still have the same problem and now I have nothing left on the screen and the lights are off.

What can I do?

»kikzy« hat folgendes Bild angehängt:

sebastian

Administrator

Beiträge: 10 517

Dienstag, 6. Oktober 2020, 14:33

looks like an usb issue. connect only the vision device. disconnect all other usb devices.
ensure all your drivers / bios .. is up to date. Try to flash the device again with the aquasuite. (do not uninstall the aquasuite)

kikzy

Newbie

Beiträge: 3

Mittwoch, 14. Oktober 2020, 13:27

ok, i tried everything , same issue.

What can i do ?

Shoggy

Sven - Admin

Beiträge: 18 130

Donnerstag, 15. Oktober 2020, 13:17

If possible, try the update with a different PC. It would not not be the first time that a PC has a unstable USB connection that does not allow an update.

kikzy

Newbie

Beiträge: 3

Samstag, 17. Oktober 2020, 17:33

problem solved ! did the update on different computer.

Thank alot :thumbsup:

VISION Glow table top issue

VISION Glow table top issue

Ähnliche Themen