• 16.04.2024, 06:57
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

RGB Question re: OCTO and Farbwerk 360

kensaundm31

Junior Member

Beiträge: 18

RGB Question re: OCTO and Farbwerk 360

Montag, 23. November 2020, 11:24

Hello.


I have 10 NON RGB fans and 7 ARGB fans.(EK DRGB X3M) Also I have monoblock (ARGB), res (ARGB), pump (ARGB), distro plate (ARGB), gpu (ARGB)


I intend to get the OCTO for the pwm for all fans with no more than 4 on a channel.


As for the ARGB I guess I'd need a Farbwerk 360? I would prefer to be able to control the fans as 1 device on the OCTO and the other 5 devices separately using the Farbwerk although I could use a splitter to combine 2 of the 5 devices so they could fit into 4 channels? Will that work, does the fabriwerk connect to the OCTO or would the farbwerk connect to usb? I think i may need some adapters.
?


Can someone help me understand what I need?

SaiBork

Junior Member

Beiträge: 24

Montag, 23. November 2020, 11:30

Ha, timing, I posted almost the same thing 20 minutes before you :D Slightly different setup, so lets see what response we get.

k2viper

Full Member

Beiträge: 154

Montag, 23. November 2020, 14:33

OCTO has its own 2-channel RGB controller that can drive D-RGB vardars with res and other stuff you mentioned.
You will need: rgbpx cables, number and length to suit your needs: https://shop.aquacomputer.de/advanced_se…s=rgbpx&x=0&y=0
rgbpx to D-RGB connectors, one per daisychain https://shop.aquacomputer.de/product_inf…roducts_id=3829

General limits are 90 leds per channel (180 total for octo), and 20 (?) LED controllers in software, meaning 20 different RGB effects assigned to 20 different LED groups.

20 is farbwerk360 limit having four channels, I'm not sure OCTO has the same 20 limit or it is reduced.

kensaundm31

Junior Member

Beiträge: 18

Montag, 23. November 2020, 20:36

Zitat von »k2viper«

OCTO has its own 2-channel RGB controller that can drive D-RGB vardars with res and other stuff you mentioned.
You will need: rgbpx cables, number and length to suit your needs: https://shop.aquacomputer.de/advanced_se…s=rgbpx&x=0&y=0
rgbpx to D-RGB connectors, one per daisychain https://shop.aquacomputer.de/product_inf…roducts_id=3829

General limits are 90 leds per channel (180 total for octo), and 20 (?) LED controllers in software, meaning 20 different RGB effects assigned to 20 different LED groups.

20 is farbwerk360 limit having four channels, I'm not sure OCTO has the same 20 limit or it is reduced.
NIce one thanks.

Ähnliche Themen