• 16.04.2024, 06:54
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Farbwerk and RGBpx

kip714

Junior Member

Beiträge: 8

Farbwerk and RGBpx

Sonntag, 24. Januar 2021, 01:29

I have a Farbwerk and RGBpx strips. I can't find the correct cable to connect them. I bought a cable that plugs into the Farbwerk but not the RGBpx. Any help would be appreciated.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »kip714« (24. Januar 2021, 01:38)

InfoSeeker

Senior Member

Beiträge: 1 758

Sonntag, 24. Januar 2021, 02:09

farbwerk does not do addressable RGBs, you need farbwerk 360 for that, then you can use these cables.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (24. Januar 2021, 02:11)

mditsch

Senior Member

Beiträge: 586

Sonntag, 24. Januar 2021, 07:11

Zitat von »InfoSeeker«

farbwerk does not do addressable RGBs, you need farbwerk 360 for that, then you can use these cables.


I guess the sentence from infoseeker could be misunderstood..
I think better is: "Farbwerk does not do adressable RGBs like RGBpx.You need...". 8)

Dieser Beitrag wurde bereits 3 mal editiert, zuletzt von »mditsch« (24. Januar 2021, 07:49)

kip714

Junior Member

Beiträge: 8

Sonntag, 24. Januar 2021, 14:26

Thanks for the info. I'm pretty sure what I read was in English.... and I still didn't understand. My last build has a Aquareo 6XT, Hubby and 2 Splitty 9's. It took awhile to figure that setup out. Just started on my new build, have been out of the buying loop for a couple of years, saw the Farbwerk and bought it. Then of course I saw the Farbwerk 360 and the Octo. Seems like I jumped the gun on the Farbwerk. Again, Thanks for the info...

kip714

Junior Member

Beiträge: 8

Sonntag, 24. Januar 2021, 14:30

Is it possible to connect an Octo and a Quadro in the same system? Or would a Farbwerk 360 and an Octo work. I'm trying to get rpm's and full control over all 11 fans along with temperature sensing RGBpx.

kip714

Junior Member

Beiträge: 8

Sonntag, 24. Januar 2021, 14:53

I see I would have to connect 3 fans together on the Octo and I presume those three fans would only read 1 RPM signal? Can I connect an Octo and a Quadro to read all 11 fan RPM's?

InfoSeeker

Senior Member

Beiträge: 1 758

Sonntag, 24. Januar 2021, 17:28

Zitat von »kip714«

Is it possible to connect an Octo and a Quadro in the same system? Or would a Farbwerk 360 and an Octo work. I'm trying to get rpm's and full control over all 11 fans along with temperature sensing RGBpx.

Zitat von »kip714«

I see I would have to connect 3 fans together on the Octo and I presume those three fans would only read 1 RPM signal? Can I connect an Octo and a Quadro to read all 11 fan RPM's?

You cannot 'connect' an octo & quadro together, but if you have them both on USB, each will have it's own tab in the aquasuite, and you will have a separate fan controller for each fan port (8+4).

kip714

Junior Member

Beiträge: 8

Sonntag, 24. Januar 2021, 18:09

Thank you Infoseeker. You name should be Infogiver. :) :) .. Now I can order what I need, not what I think I need. :) :)

Ähnliche Themen