• 19.04.2024, 09:28
  • Registrieren
  • Anmelden
  • Sie sind nicht angemeldet.

 

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

3-pin Adapters and splitters

Montag, 12. April 2021, 21:40

Hi,

I'm currently in the process of building my first loop, and I'm stuck on connectivity issues.

Parts of my setup come from EK, so the RGB cables are 3-pins 5V connectors.
Now I want to control everything from an OCTO, and I know that I'll need an 3-pin -> RGBpx adapter (this one) and an RGBpx cable (this one).

But what if I want to connect all 3 of my aRGB components on one RGBpx connector? Would it work if I use a splitter (such as this EK splitter?), or do I need a FarbWerk before?

Thanks for any answer you can provide!

Dienstag, 13. April 2021, 17:36

Would it work if I use a splitter (such as this EK splitter?)
This Splitter works.
But there are a number of Problems, because the Splitter connects the LEDs in parallel. (rgbpx is designed to have a serial connection)
- All connected devices show the same color sequence, because the data is shared. It is no longer possible to address each LED seperately.
- If the connected devices have different amount of LEDs, it will limit or break some color effects.
- In the Aquasuite software, you have to create a dummy effect at the end to match the total numbers of LEDs.

Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Hufeisen« (13. April 2021, 17:40)

Ähnliche Themen