Sie sind nicht angemeldet.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Rocketlaketx« (20. Juni 2021, 06:12)
Thank you for all your valuable input.
Basically, I’m hearing that controllers & connectors are software oriented and can only operate connected to an active motherboard; that there are no controllers and/connectors that will operate connected only to a bridged PSU? Am I correct?
AC controllers work without motherboard. Aquasuite basically just program them, then they run autonomously. The motherboard is only needed if you use software sensors to control the fans (components temperature readings, virtual sensors etc..).
If you only use like your water temperature sensor directly connected to a controller, it will run with only the PSU.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Rocketlaketx« (20. Juni 2021, 20:24)
I believe you had the answer in your other post in the german section.. AC = Aquacomputer. I was referring to Octo and Quadro mostly.. and yes they work with the Aquasuite softwareAC controllers work without motherboard. Aquasuite basically just program them, then they run autonomously. The motherboard is only needed if you use software sensors to control the fans (components temperature readings, virtual sensors etc..).
If you only use like your water temperature sensor directly connected to a controller, it will run with only the PSU.
I was not aware of A/C computer controllers, would you be so kind as to identify some of the well built and reliable A/C controllers available on the market?
I am not familiar with Aquasuite isn’t that a software?
Thank you.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Remayz« (20. Juni 2021, 21:57)
I believe you had the answer in your other post in the german section.. AC = Aquacomputer. I was referring to Octo and Quadro mostly.. and yes they work with the Aquasuite softwareAC controllers work without motherboard. Aquasuite basically just program them, then they run autonomously. The motherboard is only needed if you use software sensors to control the fans (components temperature readings, virtual sensors etc..).
If you only use like your water temperature sensor directly connected to a controller, it will run with only the PSU.
I was not aware of A/C computer controllers, would you be so kind as to identify some of the well built and reliable A/C controllers available on the market?
I am not familiar with Aquasuite isn’t that a software?
Thank you.
Thank you for all your valuable input.
Basically, I’m hearing that controllers & connectors are software oriented and can only operate connected to an active motherboard; that there are no controllers and/connectors that will operate connected only to a bridged PSU? Am I correct?
AC controllers work without motherboard. Aquasuite basically just program them, then they run autonomously.
The motherboard is only needed if you use software sensors to control the fans (components temperature readings, virtual sensors etc..).
If you only use like your water temperature sensor directly connected to a controller, it will run with only the PSU.
-