Is my MPS high flow faulty already? It shows up as an unknown USB device in Device Manager. It's also not registering in Aquasuite anymore. The MPS is connected via aquabus through an aquabus X4 and USB at the same time. Any thoughts?
Remove the unknown USB device and try to connect again.
Remember to turn on the AQUA service.
In my impression,
if both USB and AQUABUS devices are connected at the same time, they will be powered by AQUABUS and no longer be powered by USB.
Some updates here. For some reason unknown to me, the High Flow USB now appears in Aquasuite but is still missing from the list of devices in aquabus. It is also no longer marked as unknown USB device in Device Manager. I checked Aqua Computer Service is indeed running.
I performed a reset device to factory defaults but no go. I set the aquabus address of MPS to a value that is different from the rest of the devices connected to the aquabus to avoid conflict but still no luck and flow readings remain at 0.
Some updates here. For some reason unknown to me, the High Flow USB now appears in Aquasuite but is still missing from the list of devices in aquabus. It is also no longer marked as unknown USB device in Device Manager. I checked Aqua Computer Service is indeed running.
I performed a reset device to factory defaults but no go. I set the aquabus address of MPS to a value that is different from the rest of the devices connected to the aquabus to avoid conflict but still no luck and flow readings remain at 0.