Sie sind nicht angemeldet.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (12. November 2021, 13:28)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »WinstonWoof« (13. November 2021, 09:00)
Pump 1 was originally on PWM port 1, and I moved it to port 3 to check port failure.Why not swap the Pump headers 2,3 & 7 to say 4,5 & 6 , configure them as you have done now on 2.3 & 7 and see if the problem persists
FYI the max total load is 100W with each individual header being up to a max of 2o(or is it 25?) W
Pump 1 was originally on PWM port 1, and I moved it to port 3 to check port failure.
The problem appears to be with the pump, it looks like it is drawing too much current.
Ahhhh :)
Are both the pumps the same make/model or different then?
I'm lucky in that he Pump on my EKWB Quanum FLT has a seperate power supply so all the octo does is PWM control rather than having to supply the full pump demand
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (13. November 2021, 15:17)
-