• 10.02.2025, 13:29
  • Register
  • Login
  • You are not logged in.

 

Dear visitor, welcome to Aqua Computer Forum. If this is your first visit here, please read the Help. It explains how this page works. You must be registered before you can use all the page's features. Please use the registration form, to register here or read more information about the registration process. If you are already registered, please login here.

Leakshield install problems

Wednesday, November 24th 2021, 7:12pm

Hello,

I'm having the following issues with the Leakshield:

When starting it seems like it wants to do a pressure test and then goes to ~130mbar and then drops to 54 or so. It maintains 54ish and then steadily starts climbing. (See Picture)

Aquasuite says: "Factory test with 50 ML test body".

I am simply trying to leak test the Ultitube/Leakshield/D5 Next itself to double check everything, and this is what I'm seeing. I had it hooked up to a radiator previously and I'm getting the same results.

Thanks.
Praetorian has attached the following image:
  • leakshield setup.png
Praetorian has attached the following file:

Wednesday, November 24th 2021, 7:27pm

Your LEAKSHIELD is in Satus Release.
Have you configured the LEAKSHIELD yet?
You can find the configuration and the actions on the page "LEAKSHIELD".
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

Wednesday, November 24th 2021, 7:29pm

Your LEAKSHIELD is in Satus Release.
Have you configured the LEAKSHIELD yet?
You can find the configuration and the actions on the page "LEAKSHIELD".
I have yes, I don't have the pump connected or anything since it's just a leak test though. I updated the firmware and reset to factory defaults also.

Wednesday, November 24th 2021, 9:23pm

Well I made it further. I don't know what it wants. It seems to be calibrating, but I have no idea what it is calibrating

Edit Help would be much appreciated, I'm hoping to be able to get this working without an RMA.
Praetorian has attached the following image:
  • aquasuite_2021-11-24_12-22-29.png

This post has been edited 2 times, last edit by "Praetorian" (Nov 25th 2021, 4:25am)

Thursday, November 25th 2021, 7:34am

What happens when you set the LEAKSHIELD to Shield?
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

Shoggy

Sven - Admin

Thursday, November 25th 2021, 9:03am

Aquasuite says: "Factory test with 50 ML test body".
There went something wrong in the factory. The calibration process was not finished correctly. That can not be fixed by yourself and you will need a replacement device.

Please get in touch with us via e-mail and provide your full postal address and a phone number.