Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Speedy-VI« (5. Dezember 2021, 06:42)
Yes it should, and it does, for less than 1 second. I played wtih it some more.Try clicking on the monitor icon to display the page on your desktop.
The aquasuite should load the selected page automatically on startup.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Remayz« (12. Dezember 2021, 00:00)
Thank you for responding. Yeah I do have some pages I made that I don't really use, and its easy to regenerate the default panels for each device.i never had the issue, but i always delete the devices overview pages to only keep the custom one i make. I guess that limits the choices of panels for AQS to load.
Maybe before doing a full reinstall, try to delete all tthe pages and only keep the one you use?
You can still generate the devices pages from the settings afterwards.
Edit : i didn't see you were on X47. I am on X44, so, maybe not comparable.
Thank you for responding. Before getting into the details of the multiple display setup, I want to mention that the same thing happens if I select an AQS generated page to auto-load. The AQS generated page does load, starting at (20.20), but then disappears a split second later. The display icon for the AQS generated page turns orange for a split second, then turns back to gray, This is happening to all pages, including my strange 2-display pages but also to AQS default pages, so I don't think this is being caused by my strange page layout. When I load it manually, it works perfectly.I believe you may have found your issue... the aquasuite is probably displaying your display page where there are no monitor pixels.
What is the x,y of the upper-most/left-most object in your page?
How did you set up the relational position of your various monitors?
I use the 'Display setting' ([attach]8950[/attach])
fyi: all the zero values in your diagram are ones, not zeros.
Thank you. I feel like I have not done a great job of explaining this whole 2-panel setup, but while I did think it may be causing my issue, the fact that the same exact thing happens with an AQS generated panel, and the fact that it works perfectly if I manually load the 2-display panel makes me think that something else is going on that is causing any auto-loaded panel to immediately unload.It all sounds sensible, but how did you specify the 1024x600 pixel display has it's 1,1 pixel at the 3841,1 position in the display matrix?
And the same for the 1920x480 monitor's 1,1 position being at the 1921,1081 position in the matrix?
Yes display 2 which is the left main display is designated as the "Main Display" in Windows. My coordinates are working fine, as is the 2-dsiplay page. It just won't stay loaded after auto-loading. It I load it manually it works fine. Same for all of the overview pages, including the AQS generated ones for my Octo and Farbwerk360's. They all auto-load for a split second and then disappear. I checked the coordinates for some of the other custom pages I made. There were some that I had entered a "0" for an X or Y coordinate (same mistake I made in the drawing I linked earlier). Maybe doing this messed something up. I am going to make sure none of my page items have a "0" as a coordinate, then export the ones I want to keep, then try a full uninstall / re-install. I have feeling this may fix the issue, so thank you for pointing out that the first pixel is at (1,1), not (0,0).In your 'Display settings' (at the bottom), have you designated page 2 as your main display page? ([attach]8953[/attach])
I believe that defines the 1,1 of your display matrix.
Thank you for commenting (and actually reading this thread). I will try that but wish to point out that this also happens if I close AQS, wait 10 seconds (or more), and restart AQS. So it does not only happen during startup of AQS with Windows.Try to increase the aquasuite startup delay +5 seconds.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »Speedy-VI« (19. Dezember 2021, 05:38)
I have done everything I can think of to get an overview page to autoload, including one of the default pages that don't have weird layouts for driving 2 different displays at the same time. I give up. I have spent time changing which page is set to autoload and staring at the aquasuite.xml config file to understand how the lines of code that have to do with overview pages change when I change which page is set to autoload, which page is currently displayed on the desktop, etc. Some of the changes I see happen in the aquasuite.xml file make sense, some do not. I cannot figure out why the overview page loads for a split second then unloads. All of my overview pages do this, including the AQS generated pages.
So I guess I am going to try a complete uninstall and re-install of AQS. I can export all of my device settings and overview pages before I uninstall. My question is what about things in the playground? Is there a way I can save my Inputs, virtual software sensors, outputs, and global profile settings, or will I have to rebuild all of that? I am afraid that if I don't do a full uninstall, I may not eliminate whatever is causing this. I really don't want to uninstall then do a clean install, then have to rebuild everything I have set up in the playground. I don't see an Export button for any of these. Is there a way I can salvage all of the stuff I have set up in the playground and reload it after a clean install? I really don't want to do this but I am at wits end with this overview page autoload issue. It's such a simple thing, and it used to work fine. I have no idea what is causing the overview pages to load, then immediately unload. I give up.
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »Speedy-VI« (19. Dezember 2021, 20:18)
-