Sie sind nicht angemeldet.
Actually the "High Flow NEXT" connected via 3 pin cable to OCTO does not work. You get a flow number about 3 times bigger than actual flow. Just tried it.
- Any FLOW SENSOR MPS if both Flow Sensor & Octo are connected by USB, & the aquasuite is running.
- The HIGH FLOW LT and HIGH FLOW 2 include this CONNECTION CABLE in the box
- The HIGH FLOW NEXT with THIS CONNECTION CABLE
OR If both High Flow NEXT & OCTO are connected by USB, & the aquasuite is running, no cable is required
- The HIGH FLOW NEXT with THIS CONNECTION CABLE
OR If both High Flow NEXT & OCTO are connected by USB, & the aquasuite is running, no cable is required
I connected my HFN with that cable to my Octo (Flow connector) and my flow rate reading from HFN disappeared and what I got on Octo was wildly different.
Without the cable, for some reason Octo isnt able to get the flow rate on its sensor (I had assumed it would get it from the software side of things automatically, but it looks like its only able to read from the connector)
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »InfoSeeker« (3. Februar 2022, 03:09)
-