• 16.04.2024, 18:47
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Feature Request: Allow high flow NEXT "power" sensor to use alternate sensor source for temp like a temp sensor

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

z00mantwo

Junior Member

Beiträge: 35

Feature Request: Allow high flow NEXT "power" sensor to use alternate sensor source for temp like a temp sensor

Donnerstag, 27. Januar 2022, 06:34

Allow high flow NEXT "power" sensor to use alternate sensor source for temp like a temp sensor connected to a OCTO. I already have a sensor on the OCTO attached to outside the case to get ambient temperature of the room the computer is in.

sebastian

Administrator

Beiträge: 10 517

Donnerstag, 27. Januar 2022, 07:30

This is not possible, this is only working with the external connected sennsor.

InfoSeeker

Senior Member

Beiträge: 1 758

RE: Feature Request: Allow high flow NEXT "power" sensor to use alternate sensor source for temp like a temp sensor

Donnerstag, 27. Januar 2022, 13:10

Zitat von »z00mantwo«

Allow high flow NEXT "power" sensor to use alternate sensor source for temp like a temp sensor connected to a OCTO. I already have a sensor on the OCTO attached to outside the case to get ambient temperature of the room the computer is in.

If you are using a room ambient temperature sensor as the input to the High Flow NEXT's external sensor, your results will be astronomically wrong.
The external input should be a coolant sensor at the OUT port of the radiator, and the High Flow NEXT should be just head of the IN for the radiator.
This will give an estimate of the power dissipated by the radiator.

z00mantwo

Junior Member

Beiträge: 35

Donnerstag, 27. Januar 2022, 13:58

Thanks. :) Figured that out after posting this. Miss interpreted "external sensor" as external to the case or room ambient.

I'll get a proper sensor ordered from aquacomputer.

z00mantwo

Junior Member

Beiträge: 35

Freitag, 28. Januar 2022, 20:33

Zitat von »sebastian«

This is not possible, this is only working with the external connected sennsor.
What about when you have an OCTO and a high flow NEXT together and already have a water temp sensor connected to the OCTO? Can't move the sensor to the high flow NEXT since the plug sizes are different.

InfoSeeker

Senior Member

Beiträge: 1 758

Samstag, 29. Januar 2022, 02:17

Correct, currently THESE are your only options for the High Flow NEXT's 'external' temperature sensor port.

Ähnliche Themen