• 25.04.2024, 01:53
  • Registrieren
  • Anmelden

  • Sie sind nicht angemeldet.

 

Leakshield often getting alarm: Warning: Frequent pump activation indicates leakage

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

nighteagle123

Newbie

Beiträge: 8

Leakshield often getting alarm: Warning: Frequent pump activation indicates leakage

Montag, 11. April 2022, 22:05

Hi

I just got a Leakshield a couple of weeks ago. I have a D5 with ultitube 150, 3x 360 radiator, a 3080TI and a 12900k being cooled. Often when gaming an alarm goes of. I have deactivated the sound. The alarm says: Warning: Frequent pump activation indicates leakage. There is no leakage. How do I disable the alarm for frequent pump activation?

Thanks in advance.

plusran

Newbie

Beiträge: 5

Mittwoch, 13. April 2022, 07:53

I have the same problem. It was working fine, but I added a gpu waterblock today and now the alarm happens whenever i start a game.

Taubenhaucher

God

Beiträge: 2 118

Mittwoch, 13. April 2022, 08:10

Since you both don't give any helpful information about your loops, one can only guess here.

Is it possible that you do not have enough air volume in your reservoir, at least 100 ml is recommended.
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

Remayz

Senior Member

Beiträge: 708

Mittwoch, 13. April 2022, 10:21

warming/cooling water + small air gap will cause come pressure swings in the loop.

plusran

Newbie

Beiträge: 5

Donnerstag, 14. April 2022, 00:17

Zitat von »Taubenhaucher«

Since you both don't give any helpful information about your loops, one can only guess here.

Is it possible that you do not have enough air volume in your reservoir, at least 100 ml is recommended.

What information do you need?
https://imgur.com/a/obIvbbi
The tubes are 16/10, it worked before i added the gpu waterblock. the coolant is distilled water and ekwb cryofuel clear from concentrate. the water level detection is always off, sometimes way off.

nighteagle123

Newbie

Beiträge: 8

Freitag, 15. April 2022, 20:04

Brand new EK-DuraClear Internal diameter (ID): 9,5 mm (3/8"), Outer diameter (OD): 15,9 mm (5/8")

3x360 radiators. 1x 3080Ti with aquacool waterblook. One 12900K with EK waterblock.

Everything worked fine before I added the leakshield. It still works fine. Just that the alarm constantly goes off while gaming.
»nighteagle123« hat folgende Dateien angehängt:
  • 1.jpg (273,18 kB - 218 mal heruntergeladen - zuletzt: 25. März 2024, 13:14)
  • 2.jpg (306,77 kB - 223 mal heruntergeladen - zuletzt: 25. März 2024, 13:14)
  • 3.jpg (609,41 kB - 220 mal heruntergeladen - zuletzt: 26. März 2024, 09:22)

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »nighteagle123« (15. April 2022, 20:06)

nighteagle123

Newbie

Beiträge: 8

Freitag, 15. April 2022, 21:36

Zitat von »Taubenhaucher«

Since you both don't give any helpful information about your loops, one can only guess here.

Is it possible that you do not have enough air volume in your reservoir, at least 100 ml is recommended.
Does this mean if I have a D5 with a 150 ultitube only 1/3 of it should have water in it?

Taubenhaucher

God

Beiträge: 2 118

Samstag, 16. April 2022, 07:03

Quote from the FAQ

Zitat

How much air should I keep in my reservoir?
We recommend keeping at least 100 ml of air in the reservoir. The more air there is in the system,
the less often the vacuum needs to be rebuilt. In addition, if there is a large leak, more capacity in the
reservoir will allow some of the coolant in the system to be sucked back in. In short, the larger the air
cushion, the better for the LEAKSHIELD system.
Es gibt keinen Ausweg, den ein Mensch nicht beschreitet, um die tatsächliche Arbeit des Denkens zu vermeiden.
Thomas Alva Edison (1847-1931), amerik. Erfinder

nighteagle123

Newbie

Beiträge: 8

Sonntag, 17. April 2022, 19:30

Zitat von »plusran«

I have the same problem. It was working fine, but I added a gpu waterblock today and now the alarm happens whenever i start a game.
I think i solved the "Frequent pump activation indicates leakage" warning alarm.

My Ultitube 150 is 360ml. I had it filled to 71% when people said I had to little air in it. So i drained it down to around 200ml free but still the same warning alarm came while gaming.

I then adjusted the minimum pressure to 200 during Leakshield setup. So far no alarm.

Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »nighteagle123« (18. April 2022, 20:34)

Ähnliche Themen