Sie sind nicht angemeldet.
Dieser Beitrag wurde bereits 1 mal editiert, zuletzt von »L0wPull« (15. Januar 2023, 09:24)
Yes.will these devices work OK if plugged into a USB hub, with then one uplink to the PC?
The Farbwerk will be lowering the brightness of the LEDs to save power.is 0,5A per channel ("standard" usb draw, without enabling 2A limit) sufficient to drive 90 LED's?
Dieser Beitrag wurde bereits 4 mal editiert, zuletzt von »Hufeisen« (15. Januar 2023, 23:20)
Yes each device will show up in Aquasuite. I have an Octo, D5 Next, High Flow Next, Leakshield, and 2 Farbwerk360's divided between 2 internal USB hubs (Hubby7 and NZXT Gen-3).The tabs for each device appear when they are connected via USB and establish communication with Aquasuite. Using a hub to bring them all in is fine.If you connect all those devices to the Hubby and connect the Hubby to the PCs USB will each device show up in Aquasuite as individual devices?
Dieser Beitrag wurde bereits 2 mal editiert, zuletzt von »L0wPull« (19. Januar 2023, 13:47)
Yes each device will show up in Aquasuite. I have an Octo, D5 Next, High Flow Next, Leakshield, and 2 Farbwerk360's divided between 2 internal USB hubs (Hubby7 and NZXT Gen-3).The tabs for each device appear when they are connected via USB and establish communication with Aquasuite. Using a hub to bring them all in is fine.If you connect all those devices to the Hubby and connect the Hubby to the PCs USB will each device show up in Aquasuite as individual devices?
Actually brilliant for many of my needs "in der warenkorb..."....For best compatibility I would recommend Aquacomputer's own Hubby7
-