16.04.2024, 07:16
Sprache ändern
Registrieren
Anmelden
Sie sind nicht angemeldet.
Re: TwinPlex PRO for Pentium M
Donnerstag, 18. November 2004, 17:23
Zitat von »NikoMo«
as i see on the picture the mountig-hole distance is 58mm.
this is similar to the twinplex for ati.
maybe you can use this?
58mm?
if i don't have tomatoes on my eyes it's 41mm, since the twinplex is 40x40mm it won't fit.
but maybe it works if you turn the twinplex a little bit, so that the edges are between the holes.
in the shop under "ersatzteile" -> "Ersatz- und Austauschblenden" you can download TIFF-files with the "blenden" (what's an adaquate english word for these?), so you can lay these on the picture above to try if they fit in some way.
Gott hat die Welt ja nur in sieben Tagen erschaffen können, weil es keine installierte Basis gab.
Re: TwinPlex PRO for Pentium M
Samstag, 20. November 2004, 14:20
Start again 
Twinplex is ideal for this motherboard, just a small rotation of 3.6° and it is good.
The question is : for more performance and to replace the old TwinPlex, AquaComputer plans to market a TwinPlex PRO.
Of course TwinPlex is largely sufficient :
but why not a TwinPlex PRO.
Twinplex is ideal for this motherboard, just a small rotation of 3.6° and it is good.
The question is : for more performance and to replace the old TwinPlex, AquaComputer plans to market a TwinPlex PRO.
Of course TwinPlex is largely sufficient :
but why not a TwinPlex PRO.
Re: TwinPlex for DFI 855GME-MGF (Pentium M)
Samstag, 20. November 2004, 19:23
For processor, TwinPlex with chipset fastener it's OK 
But for i855 chipset, TwinPlex chipset CP4-Typ 1 or CP4-Typ 2 ?
I know, CP4-Typ 1 is for all Intel boards and CP4-Typ 2 for i850 boards but which is the physical difference ???
But for i855 chipset, TwinPlex chipset CP4-Typ 1 or CP4-Typ 2 ?
I know, CP4-Typ 1 is for all Intel boards and CP4-Typ 2 for i850 boards but which is the physical difference ???
