Connection Aquaero and VFD-Display

REDG

Junior Member

Beiträge: 24

Samstag, 11. Dezember 2004, 18:37

1

The Aquaero 3.07 VFD-Display is composed of Aquaero LT and VFD-Display.

=

+

What is the type of connection between the Aquaero and VFD ??? It is possible to off-set the VFD of the Aquaero ???
I would like to integrate the VFD-Display into this case :o

Thanks

M'en Bati Sièu Nissart

x-stars

God

Beiträge: 10 160

Re: Connection Aquaero and VFD-Display

Samstag, 11. Dezember 2004, 21:25

2

The Display is connected directly on the Ae, but it would be no problem to use a cable (for example an old ide-kabel). The only problem would be, that you won't have any warranty.

cya
x-stars

"Live free or die: Death is not the worst of evils."

r1ppch3n

Moderator

Beiträge: 14 318

Re: Connection Aquaero and VFD-Display

Samstag, 11. Dezember 2004, 21:36

3

the displays are directly soldered onto the ae
but if you don't care about warranty i don't see any problem there

REDG

Junior Member

Beiträge: 24

Re: Connection Aquaero and VFD-Display

Sonntag, 12. Dezember 2004, 21:07

4

Why no warranty ???

If I buy aquaero LT and VFD-Display separately, I have warranty on each material

Of course if I burn the equipment by welding my cable no warranty, but if not ...

The Silverstone 2x16 VFD-Display and the Noritake 2x20 VFD-Display are in parallel.
So, it is possible to connect the Silverstone VFD-Display to the aquaero LT ???

M'en Bati Sièu Nissart