Aqua Lighting LED mod for the Aquatube - English forum - Aqua Computer Forum

19.04.2024, 23:44
Sprache ändern
Registrieren
Anmelden

Dauerhaft angemeldet bleiben?
Sie sind nicht angemeldet.

Aqua Lighting LED mod for the Aquatube

Full Member

Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 13:24

1

hi is it just me or is the Aqua Lighting LED mod for the Aquatube very loose inside? It fits in perfectly but theres nothing to push in to make sure its in place... you need to apply very little (if any) pressure to get it out. Am i missing something or should i use some sort of selotape etc.??

Thanks Ed

http://www.aqua-computer.de/prodimg/nd_p…t_unten_500.jpg

God

Beiträge: 2 262

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 13:57

2

you are right. i personally, fixed the problem with a littlebit glue, because while the first try with tape, the led has loosen himself, because of the heat

Senior Member

Beiträge: 1 041

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 14:01

3

A dab of clear RTV also works well.

Full Member

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 14:18

4

sort of on the same subject:

how did everyone else tighten the plexi inserts into the aquatube? cos there's nothing on it to help you grip it, as far as i can see..

Senior Member

Beiträge: 1 041

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 14:28

5

latex or rubber gloves

Full Member

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 14:40

6

i just used my hands yer there is no other way unless you use plyers but i think its should be secure enough by just hand tightening it

Full Member

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 14:58

7

excellent, cheers guys
maybe they should have made them with a hexagonal hole, like the metal bungs?

Full Member

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 15:08

8

yer would have been better that way

Senior Member

Beiträge: 1 041

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 21:55

9

Ever tried to put a round peg in a square hole?

Full Member

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 22:28

10

yes and it's fine if you make the sides of the square equal the diameter of the round peg

Senior Member

Beiträge: 1 041

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 22:39

11

True, but then the LED light would probably be going in places you didn't intend it to...

Full Member

Re: Aqua Lighting LED mod for the Aquatube

Sonntag, 15. Mai 2005, 22:44

12

why?

if you make the hole so it's a tight fit, as they are now, there shouldn't be any problems. you can always use:

Zitat

A dab of clear RTV