The Aquastream can be monitored (status, voltage, consumption, power) and controlled (frequency, deaeration) with the Aquaero.
The pump works with 12 volt from your PSU. It has a deaeration mode which can be activated via a jumper or the Aquaero. The Aquastream works a bit quieter compared to a normal 1046. It can be overclocked via the Aquaero; you are able to change the frequency between 42-74hz (47 is default).
As an example: with default settings I get a flowrate of 34 l/h and with a frequency of 74hz I gain 58 l/h.
The controller has two changeable status LEDs wehre you can see if everything is ok or not
If not the red LED will blink an error code.