PrimoFlex

vils

Junior Member

Beiträge: 32

Mittwoch, 15. Juni 2005, 03:40

1

PrimoFlex is an excellent tubing but when trying to connect my TwinPlex gpu cooler it was to thick

It would have been nice if the web-shop had mentioned the max od of the tubes. The clearence while using 3/8" (ID) is'nt to big.

Now I either have to buy new tubing or a new gpu block.

All work and no play makes Jack a dull boy.

Shoggy

Sven - Admin

Beiträge: 18 130

Re: PrimoFlex

Mittwoch, 15. Juni 2005, 16:15

2

Every AC product is using plug n cool connectors for tubing with an outside diameter of 8mm and an inside diameter of 6mm.

vils

Junior Member

Beiträge: 32

Re: PrimoFlex

Donnerstag, 16. Juni 2005, 04:19

3

I orderd this block directly from the AC shop and chose "Anchluss-
Schlauchtullen 10mm" But since the distance between the hose barbs is so small they only seem to accept a wall thickness of around 1,5mm. It is this crucial part of information I would have liked to see at the web-shop.

/Vils

All work and no play makes Jack a dull boy.

stu_allen

Junior Member

Beiträge: 44

Re: PrimoFlex

Donnerstag, 16. Juni 2005, 22:47

4

Zitat von »vils«

I orderd this block directly from the AC shop and chose "Anchluss-
Schlauchtullen 10mm" But since the distance between the hose barbs is so small they only seem to accept a wall thickness of around 1,5mm. It is this crucial part of information I would have liked to see at the web-shop.

/Vils

3/8 ID is 9.375mm - and the connectors you specified are for 10mm OD/8mm ID so its no wonder its a tight fit!