18.04.2024, 12:46
Sprache ändern
Registrieren
Anmelden
Sie sind nicht angemeldet.
Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.
- 1
- 2
new: poweradjust USB for Laing® pumps
Freitag, 1. September 2006, 19:36
In the middle of septemer the new USB controller poweradjust for Laing pumps will be available. With the help of this smart unit you are able to control ypur Laing pump or other stuff with a max. power of 30W. The controller uses a programmable DC voltage (no PWM).
For the Laing pump it will offer you the following features:
- parameterizable start burst
- measurement of the maximum speed
- parameterizable deaeration-program
- adjustable voltage
- adjustable rotation value
- passing the tachosignal to the mainboard or
- production of a "ok signal" in the controller
- speed monitor with renewed burst if the pump stops
Besides all these features you are able to configure the controlling rules including a max. and min. rotation speed which is important for other pumps.
The controller has programmable jumpers which can be used with presets.
Little bonus: you can connect a flow meter to the controller.
The poweradjust controller will be available as standard and as LT version. Price starts at 29.90 Euro including cable and aquasuite.
The standard version (30W) is air-cooled while it is possible to watercool it with a voltage regulator block for Abit boards (see third picture).
A few pictures:
For the Laing pump it will offer you the following features:
- parameterizable start burst
- measurement of the maximum speed
- parameterizable deaeration-program
- adjustable voltage
- adjustable rotation value
- passing the tachosignal to the mainboard or
- production of a "ok signal" in the controller
- speed monitor with renewed burst if the pump stops
Besides all these features you are able to configure the controlling rules including a max. and min. rotation speed which is important for other pumps.
The controller has programmable jumpers which can be used with presets.
Little bonus: you can connect a flow meter to the controller.
The poweradjust controller will be available as standard and as LT version. Price starts at 29.90 Euro including cable and aquasuite.
The standard version (30W) is air-cooled while it is possible to watercool it with a voltage regulator block for Abit boards (see third picture).
A few pictures:
Re: new: poweradjust USB for Laing® pumps
Dienstag, 5. September 2006, 19:30
Shoggy - you are right 
That's the thing. The Laing DDC pumps are not an unique AC product and the controller is made for all users of Laing pumps - which is mainly not the group of AC users.
So USB was a better choice in our opinion. Our own products will be supported by aquabus (and USB).
Certainly there are less hardware controlling options through the aquaero in this case. But you have the possibility to use the RPM detection of the mainboard for error detection.
That's the thing. The Laing DDC pumps are not an unique AC product and the controller is made for all users of Laing pumps - which is mainly not the group of AC users.
So USB was a better choice in our opinion. Our own products will be supported by aquabus (and USB).
Certainly there are less hardware controlling options through the aquaero in this case. But you have the possibility to use the RPM detection of the mainboard for error detection.
Re: new: poweradjust USB for Laing® pumps
Samstag, 2. Dezember 2006, 05:28
if it's ok for you, you can use the the exchange front plate of the aquastream which fits the poweradjust nicely (although it reads "aquastream")
Zitat von »euonline«
could anyone tell me if the poweradjust is also avaible in BLACK?
I also would like to know if I can buy it in PORTUGAL.
I don't kno w about aquacomputer, but you can try http://www.aqua-computer-berlin.de/ a reseller.
- 1
- 2