Flow Meter connected to PA2!

Lieber Besucher, herzlich willkommen bei: Aqua Computer Forum. Falls dies Ihr erster Besuch auf dieser Seite ist, lesen Sie sich bitte die Hilfe durch. Dort wird Ihnen die Bedienung dieser Seite näher erläutert. Darüber hinaus sollten Sie sich registrieren, um alle Funktionen dieser Seite nutzen zu können. Benutzen Sie das Registrierungsformular, um sich zu registrieren oder informieren Sie sich ausführlich über den Registrierungsvorgang. Falls Sie sich bereits zu einem früheren Zeitpunkt registriert haben, können Sie sich hier anmelden.

chippie

Full Member

Beiträge: 84

Flow Meter connected to PA2!

Donnerstag, 22. März 2012, 16:49

Is anyone running a flow meter connected to a PA2?

I am currently using a Koolance INS-FM18 (have a AquaComputer one on order) which when connected to my aquaero 5 XT gives a nice constant reading but as soon as I connect it to one of my PA2's (have tried 3 of them) the reading jumps up and down by around 90%.

Does the PA2 need a firmware update? can it just not handle the flowmeter? as am a little confused why it should be ok on the XT yet all over the place when connected to a PA2.

Thanks

chippie

Full Member

Beiträge: 84

Mittwoch, 28. März 2012, 18:07

Anyone able to try this on their build to see if it works, connecting a flowmeter to a PA2 that is?

TheSmoker

Junior Member

Beiträge: 16

Mittwoch, 28. März 2012, 20:09

The answer is on this thread: Aquaero 5 Pro + INS-FM17
Cheers!

chippie

Full Member

Beiträge: 84

Montag, 2. April 2012, 18:52

Thanks but my OP does say that it works fine connected to the 5XT. I only have an issue when it is connected to any of my PA2's.

franknitty69

Junior Member

Beiträge: 40

Dienstag, 10. April 2012, 16:52

i have an aquacomputer flow meter and it works plugged into the a5 or a pa2.

Namron

Full Member

Beiträge: 211

Dienstag, 10. April 2012, 22:55

I also have an Aquacomputer flow meter pluged into my PA2 & another Aquacomputer flow meter pluged into my AQ5, All work fine & never had any issues with either
N.

chippie

Full Member

Beiträge: 84

Sonntag, 15. April 2012, 20:48

Thanks for the replies, I have a AQ one here now so will give it a try when I can.

Does seem strange though that he Koolance one works ok on the XT but not on the PA2.

Phatboy69

Full Member

Beiträge: 177

Dienstag, 17. April 2012, 08:49

The A5 has more processing ability and can filter the signal better. I have the same problem and even some fans that worked well on the A5 had rpm sense problems on the PA2s. The guys told me it was because of a dirty signal.

I am Intel of Borg. Resistance is futile. You will be assimilated.

i7 3930K @5Ghz - X79 ASUS Rampage IV Extreme - 4x SLI GTX580 - 16GB DDR3-2000 - 4x GTX 360 rads 24x CM fans - Aquaero 5 XT +6 PA2 Ultras - 2 x Enermax 1500W PSU - MM Extended Ascension Case - 2 x 452x2 Res and 4 x D5 - 3 x 24" Acer H243H LCD

Flow Meter connected to PA2!

Flow Meter connected to PA2!

Ähnliche Themen